Currency USD
Automatic Sterilizer, Ritter M3 buy in Rochester
Buy Automatic Sterilizer, Ritter M3
Automatic Sterilizer, Ritter M3

Automatic Sterilizer, Ritter M3

In stock
Reconfirm the price with seller
Shipping:
Seller
USA, Rochester
(View map)
+1(5 
Display phones
Technical characteristics
  • BrandRitter
Description
The Ritter M3 UltraFast® Automatic Sterilizer is everything you need in an autoclave. Sterilize unwrapped instruments in just 6 minutes and pouched instruments in just over 10, with the touch of a button. The M3 is the simple, intelligent and fast choice for your sterilization needs, featuring:
  • One-step loading
  • Push-button cycle selection
  • Automatic-opening door
  • Intelligent features monitor water levels for worry-free operation
  • Dries instruments in as quickly as 25 minutes
  • Top fill for convenient access to water reservoir
  • Front reservoir drain with on-board drain tube storage
  • Condensate tank with quick release lid, convenient carrying handle and water level sensor
Specifications:
  • Overall length w/plug: 22" (55.9 cm)
  • Overall width: 17.8" (45.2 cm)
  • Overall height: 6.9" (17.5 cm)
  • Countertop area: 24" (61 cm) D x 22" (55.9 cm) W
  • Chamber: 12.1" (30.7 cm) L x 7.6" (19.3 cm) W x 1.6" (4.1 cm) H
  • 0.49 gal. (1.8 liters) usable volume
  • Tray: 11.75" (29.8 cm) L x 7.25" (18.4 cm) W x 1" (2.5 cm) H
  • Holds the Hu-Friedy® Signa-Stat Cassette (6.5" x 10.5" x 1.25")
  • Unit weight: 71 lbs. (32.2 kg)
  • Unit weight with water: 80 lbs. (36.3 kg)
  • Shipping weight: 80 lbs. (36.3 kg)
  • Reservoir capacity: 1.2 gal. (4.5 liters)
  • Electrical Requirements:
    115 VAC, 50/60 Hz, 12 Amp Single Phase
    230 VAC, 50/60 Hz, 6 Amp Single Phase
  • Heater Power: 1400 watts
  • Maximum Power Consumption: 1400 watts
  • UL Listed to U.S. & Canadian Standards
  • ASME Boiler & Pressure Vessel Code, Section VIII, Division 1
  • Canadian Registration Number available
  • UL 61010-1, 2nd Edition
  • IEC 61010-2-040, 1st Edition
  • CAN/CSA-C22.2 No. 61010-1 2nd Edition
  • FCC Part 15, Sub-part B
  • A separate (dedicated) circuit is recommended for this sterilizer.
  • Installation: Use on a level, water-resistant surface. For proper air circulation, allow a minimum of 2" (5 cm) clearance on sides and top; 4" (10 cm) clearance behind. Allow proper clearance for access to the reservoir fill port located on top of the sterilizer. Also, allow 14" height clearance for condensate tank.
Contact the seller
Automatic Sterilizer, Ritter M3
Automatic Sterilizer, Ritter M3
We recommend to see
Shipping method
Compare0
ClearSelected items: 0